2003 Audi A4 2.0L HTA GT3582R+30psi+water meth+115 race gas+slipping clutch=545 awhp 477.4awtq 

bob did 18 pulls on my car yesterday and today 545awhp 477.4awtq with slipping clutch and timing belt jump a tooth off, and 2.5inch mid pipe split in to  2 2.25inch exhaust, from the dyno graph you can tell the torque is on and off, coz of the slipping. i am uploading the video now, it will be on youtube soon. the clutch is Clutch Master FX600, brand new , i have no idea why the clutch is slipping, maybe it's time to go FX850. so the next upgrade will be two 3 inch resonator and 2 race mufflers, and the clutch. i think the car will make 600awhp no problem with 35psi and a better exhaust system. also the dyno is with winston's okada coil packs in it. they make 30awhp 30awtq more than my rev Ds.coz the boost was blowing the sparks away. and the akada ones makes much stronger sparks for sure. the video is shoot when the timing belt off 1 tooth, and the turbo spools about 500rpm sooner when corrected the timing belt. water meth stage 2 kit from clint@RAI, 175cc nozzle on intercooler inlet, and 625cc before the TB. 15psi start inject juice and 19psi full spray. youtube video link [url]http://www.youtube.com/watch?v=5odyqX5gc3E[/url] [attachment=353759] [attachment=353760] [attachment=353761] [attachment=353762] [attachment=353763]     

听说 turbo 的汽车修理很麻烦

出得那个钱买，就有心理准备了 一般没事，如果要翻修是挺麻烦的，也很贵

ooo ..想坐..... 对了...i am more interested to see dyno results on 91.92.94 gas, since its more real world performance numbers

想给我的B8加这个 [img]http://www.goapr.com/includes/img/products/turbo_long_20tsivl_k04.jpg[/img] [img]http://www.goapr.com/includes/img/products/dyno/20tsivl_long_dyno/20t_fsi_vl_long_s3_k04_stbe_93_crank.gif[/img]

wow..so fast!!![s:202][s:202] BTW willl it overheat easily? mine one got this problem

对了你装了blow off valve吗？  [url]http://www.youtube.com/watch?v=0zqstEBeVK0[/url]

[quote]引用第4楼darkscythe于2010-08-22 10:09发表的  : ooo ..想坐..... 对了...i am more interested to see dyno results on 91.92.94 gas, since its more real world performance numbers [url=/club/job.php?action=topost&tid=257569&pid=5950392][img]p_w_picpath/back.gif[/img][/url] [/quote] 94 pump gas 30psi , 476awhp with timing belt 1 tooth off. shit, this is my gf's account. lol

[quote]引用第5楼i3forever于2010-08-22 13:15发表的  : 想给我的B8加这个 [img]http://www.goapr.com/includes/img/products/turbo_long_20tsivl_k04.jpg[/img] [img]http://www.goapr.com/includes/img/products/dyno/20tsivl_long_dyno/20t_fsi_vl_long_s3_k04_stbe_93_crank.gif[/img] [url=/club/job.php?action=topost&tid=257569&pid=5950693][img]p_w_picpath/back.gif[/img][/url] [/quote] APR 太贵了， 建议用ATP 的exhaust manifold, HTA GT3076, 630cc fuel injectors, eurodyne Masetro 7 tune.  350whp 左右。

[quote]引用第6楼cherryion于2010-08-22 13:24发表的  : wow..so fast!!![s:202][s:202] BTW willl it overheat easily? mine one got this problem [url=/club/job.php?action=topost&tid=257569&pid=5950709][img]p_w_picpath/back.gif[/img][/url] [/quote] what overheat, engine oil? coolant or engine bay.  engine bay does get super hot, but i am putting a louver on the turbo side to decrease the engine bay temp. engine oil stays at 75 degrees Celsius daily drive(have a huge oil cooler), coolant stays around 95 degrees.

[quote]引用第7楼i3forever于2010-08-22 13:28发表的  : 对了你装了blow off valve吗？  [url]http://www.youtube.com/watch?v=0zqstEBeVK0[/url] [url=/club/job.php?action=topost&tid=257569&pid=5950720][img]p_w_picpath/back.gif[/img][/url] [/quote] 装了，red tial 50mm BOV, 那个video 是车刚刚弄好还在break in 我的motor, 那是大概是380awhp, 260awtq而已 没有EBC和MBC, running waste gate spring pressure 18-19psi左右。不是很快。

is the engine built? or thats the numbers on stock motor

[quote]引用第9楼alex911于2010-08-22 16:25发表的  : APR 太贵了， 建议用ATP 的exhaust manifold, HTA GT3076, 630cc fuel injectors, eurodyne Masetro 7 tune.  350whp 左右。 [url=/club/job.php?action=topost&tid=257569&pid=5950993][img]p_w_picpath/back.gif[/img][/url] [/quote] APR的确是很贵  到时候看看audizine有没有group buy的deal ATP我不熟悉 有local dealer吗？

engine bay ar..turbo is so hot and radiator got easily go  up to 95-105

这贴要顶，我朋友就开A4，要鼓励他朝你的方向挺进[s:202][s:202]

[quote]引用第12楼nian.l于2010-08-22 18:18发表的  : is the engine built? or thats the numbers on stock motor [url=/club/job.php?action=topost&tid=257569&pid=5951183][img]p_w_picpath/back.gif[/img][/url] [/quote] stock motor. jk... rebuild motor with huge turbo.

[quote]引用第13楼i3forever于2010-08-22 18:49发表的  : APR的确是很贵  到时候看看audizine有没有group buy的deal ATP我不熟悉 有local dealer吗？ [url=/club/job.php?action=topost&tid=257569&pid=5951258][img]p_w_picpath/back.gif[/img][/url] [/quote] 应该没有， 从ATP的网站上定，然后寄到美国边境，找个shop装上，然后可以找我的那个tuner帮你tune一下。

[quote]引用第14楼cherryion于2010-08-22 19:13发表的 回 10楼(alex911) 的帖子 : engine bay ar..turbo is so hot and radiator got easily go  up to 95-105 [url=/club/job.php?action=topost&tid=257569&pid=5951309][img]p_w_picpath/back.gif[/img][/url] [/quote] it's ok, i am resolving that problem now.

[quote]引用第15楼nessus于2010-08-22 21:25发表的  : 这贴要顶，我朋友就开A4，要鼓励他朝你的方向挺进[s:202][s:202] [url=/club/job.php?action=topost&tid=257569&pid=5951615][img]p_w_picpath/back.gif[/img][/url] [/quote] 好，让我们的audi community更壮大吧。

what you mean by install a louver? you mean hood n bumper? LOL..i was doing a twin fan instead of a single fan N big mouth bumper N hood....drag it down about 8-10'C ..i still thinking if i can do more..hmmm..got any good ideas man?

hood louver by meaning this: [img]http://farm4.static.flickr.com/3501/3293437083_bc3a61d999_b.jpg[/img] [img]http://img.photobucket.com/albums/v236/MPowerM3/Redfive/rf25.jpg[/img]